30 Way Control Panel

Each Indicator Panel has a Touch Control Panel with an indicator for:

Power ; Standard Alarm calls (Cancel) and Emergency Alarm calls (Urgent).

Additionally, a sounder will alert attending staff to the presence of a new call.

 Standard Calls

 A standard call can be generated by a Call Point, a pendant switch or a ceiling pull switch. On the Indicator Panel an LED for the corresponding zone will illuminate and the sounder will operate continuously. Staff can temporarily silence the alarm by touching the symbol (Cancel). The alarm will remain muted until another alarm is activated. The alarm call can be permanently cancelled by visiting the room where the call originated and resetting the Call Point using a magnetic key (or just pressing the reset button, if so configured).

 Emergency Calls/Call for Assistance

 Emergency calls can be activated by an Emergency Call Point or the Alert button on an Alert Call Point. In this case the zone LED will flash and the sounder will pulse on and off to create a greater sense of urgency. In the case of an Emergency call, the sounder cannot be muted; the call can only be reset at the originated Call Point.

Name labels

Each Indicator panel is supplied with strips of Name labels which can be accessed by removing a magnetic cover strip at the top of the panel. These strips can either be hand written or individual printed adhesive labels can be applied. Additionally, the strips are available on perforated A4 sheets which can be printed on a desktop printer.